Access Control - Draytek Vigor2920n User Manual

3 . 6 . 4 A c c e s s
3 . 6 . 4 A c c e s s
For additional security of wireless access, the Access Control facility allows you to restrict
the network access right by controlling the wireless LAN MAC address of client. Only the
valid MAC address that has been configured can access the wireless LAN interface. By
clicking the Access Control, a new web page will appear, as depicted below, so that you
could edit the clients' MAC addresses to control their access rights.
Enable Access Control
Policy
MAC Address Filter
Client's MAC Address
Attribute
Add
Delete
Edit
Cancel
Vigor2920 Series User's Guide
C o n t r o l
C o n t r o l
Select to enable the MAC Address access control feature.
Select to enable any one of the following policy. Choose
Activate MAC address filter to type in the MAC addresses for
other clients in the network manually. Choose Isolate WLAN
from LAN will separate all the WLAN stations from LAN
based on the MAC Address list.
Display all MAC addresses that are edited before.
Manually enter the MAC address of wireless client.
s: Isolate the station from LAN - select to isolate the wireless
connection of the wireless client of the MAC address from
LAN.
Add a new MAC address into the list.
Delete the selected MAC address in the list.
Edit the selected MAC address in the list.
Give up the access control set up.
90