Setup; Setting The Internal Clock; Initialization (Factory Reset) - Yamaha TF5 Quick Manual

8. Setup

This section explains how to set up the TF series
console the first time you turn it on.

8-1 Setting the internal clock

Set the console's internal clock, including the date,
time, and format. The date and time set here is used as
a timestamp when saving Scenes.
1
Touch the SYSTEM SETUP icon
The SYSTEM SETUP screen is displayed.
2
Touch the TIME button.
The screen for setting the time is displayed.
3
Slide the desired fields up and down to set the
date and time.
20
TF series Quick Guide
4
When finished, touch [OK].
5
Press the Home key (
The OVERVIEW screen is displayed.
NOTE
In addition to the internal clock, you can configure the
following items. For details, refer to the Reference Manual.
• AUX bus signal type
• Network settings
.
• OMNI OUT settings
• Recall Safe channels
• Settings related to controlling the Tio1608-D that is
connected to the NY64-D

8-2 Initialization (factory reset)

In the event that an internal memory error occurs or
you have forgotten your password and cannot operate
the console, you can use the following procedure to
initialize the console.
NOTE
All information that you have stored in the unit will be erased
when you initialize the unit.
Use caution when performing this procedure.
1
Turn on the console while holding down the
Home key (
2
When the maintenance screen appears, press the
Initialize All Memories button.
All settings will be restored to the factory defaults.
If an NY64-D is installed in the expansion slot, its internal
settings are also initialized.
).
).