Note: Your radio will only communicate with radios set to the same Channel
and Interference Eliminator Code.
Changing your Radio's Settings
Setting the Channel
• Turn radio On.
• To set, press
• Then press
• Press
to exit this menu.
Note: The red indicator light above the display flashes every
second when the Channel is in use.
Setting the Interference Eliminator Code
The Interference Eliminator Code helps minimize interfer-
ence by providing you with a choice of code combinations.
• Turn radio On.
• To set, press
• Then press
• Press
to exit this menu.
Note: To hear everyone on your Channel, or to communicate with a radio
that does not have Interference Eliminator Codes, select Interference
Eliminator Code
18
once the Channel display begins to flash.
or
to choose the Channel.
twice the Code display begins to flash.
or
to choose the Code.
.