Enabling Or Disabling Radio Lock (Secure Radios Only); Changing The Radio Lock Password - Motorola APX 8000H 3.5 User Manual

MN004478A01-AN
Chapter 7: Advanced Features
The new password must be different from the default password. Your service provider determines the
following requirements:
● Number of characters for a password (maximum 10 characters).
● Number of attempts for password entry.
If you exhaust all attempts at entering the correct password, the radio is deadlocked. Restart the radio to start
over.
NOTE:
Depending on the configuration, the radio can carry over the number of attempts remaining even after a
power cycle. If you exhaust all attempts in this configuration, the following occurs:
● The radio remains inhibited.
● All encryptions and secure keys are erased.
7.19.1

Enabling or Disabling Radio Lock (Secure Radios Only)

Procedure:
1. or to Logf.
2. Press the Menu Select button directly below Logf.
Result: One of the following results occur:
● The display shows Pswd enabled, indicating that the radio lock feature is enabled.
● The display shows Pswd disabled, indicating that the radio lock feature is disabled.
7.19.2

Changing the Radio Lock Password

Procedure:
1. or to Pswd.
2. Press the Menu Select button directly below Pswd.
The display shows Change Password screen.
3. or to Unlock Pswd.
4. Press the Menu Select button directly below Sel .
5. Enter the old password.
6. Press the Menu Select button directly below Ok .
7. Enter the new password.
8. Press the Menu Select button directly below Ok .
9. Re-enter the new password.
10. Press the Menu Select button directly below Ok .
Result:
The password is updated.
102