Motorola CENTRACOM 6880801D90-D User Manual page 75

The following table shows example information when clicking on
Preferences. The items below can be modified after clicking the
Customize button:
General Information
Name: Inbound Event Display
Show Inbound Event Display:
Yes
Enable Audible Indication
Customize Inbound Event
Display
Total Rows: 100
Selected Content:
1. Event State
2. Resource
3. Unit Alias
4. Alias
5. Time
6. Primary Resource
7. Unit ID
8. Event
9. Code
10. Secure Key
Click Customize to display the Customize Inbound Event Display
Preferences screen.
General Information consists of the Name of the configuration and
toggle boxes for Showing the Inbound Event Display on start up and
enabling audio indication of a message event. Maximum rows are
selected in the Customize pane as well as the column titles for
Selected Content. Again, note that the top item in the list is the left-
most column in the Inbound Event Display interface. Use the Arrow
Up and Down buttons to move an item in the list and thus its column
position.
Gold Series™ Elite Inbound Event Display
Name of the Configuration
Start Dispatch with Inbound
Event Display presented on
screen
Sound audio when a radio
message event is received at the
console
Configurable for Primary or All
Radio Resources
Enable customization of the
Maximum rows to display
The column titles of the
Inbound Event Display that will
be listed left (the top item e.g.
Event State) to right
6880801D90-D 6880801D90-D
6-9