Wireless > Status Page - Motorola SBG900 User Manual

Overview Installation Troubleshooting Contact
Wireless > STATUS Page
You can use this display-only page to
•
View the wireless interface status
•
Help perform Troubleshooting
Wireless > STATUS Page Fields
Regulatory Domain
ESSID
Channel
RTS Threshold
Frag Threshold
MAC Address
WEP Enabled
MAC Access Control
MAC Access Control List Displays the MAC addresses of wireless clients having access. The list is set on the Wireless >
Home Print
Configuration: Basic Gateway TCP/IP Wireless USB
for wireless network problems
Indicates the country the SBG900 is manufactured for. The list of channels depends on the
country's standards for operation of wireless
factory, USA FCC, Europe, Spain, France, Japan, or some other country name is displayed.
Displays the ESSID set on the
"Configuring the Wireless Network Name on the
who is not authorized to use your wireless LAN.
Displays the radio channel for the access point. If you encounter interference, you can set a
different channel on the Wireless > NETWORK Page.
Displays the Request to Send Threshold set on the Wireless > NETWORK Page.
Displays the Fragmentation Threshold set on the Wireless > NETWORK Page.
SBG900
Displays the MAC address.
Displays the type of Wired Equivalent Privacy (WEP) that is enabled. For more information, see
"Configuring WEP on the
Displays the MAC Access Control setting set on the Wireless > SECURITY — advanced Page:
• Allow Listed — Only clients in the MAC access control list can access the wireless LAN.
• Allow Any Station Access — Any wireless client can access the wireless LAN.
SECURITY — advanced Page.
X
71
Exit
FAQ
devices. Depending on the domain set at the
Wireless > NETWORK
SBG900". Never provide the ESSID to anyone
SBG900".
SBG900 User Guide
Specifications Glossary License
Page. For more information, see