Table of Contents
Advertisement
Mesh Enabled Access
VMM Device Administration Page Fields (Administrator / Super User Login)
Field Name
System Name
RDATE Server IP
Address
Wired Interface
Address
Wired Interface
Subnet Mask
DHCP Lease Time
Device Priority
Geo Settings
The External Device Provisioning frame of this web page is described in
3.2.5.2
Viewing the VMM Configuration Tab as a Normal User
A similar screen will be displayed for the Access account (the web page will indicate Normal
User Login).
Normal users can change only those settings for which they have system
privileges.
Field Description
This is the name of the device as shown by
MeshManager
The IP address of the RDATE server. This is
usually
the
MiSC
infrastructure
mode.
provides the current date to the VMM. The
VMM can operate without an RDATE server.
The VMM will tell the attached Ethernet devices
to use this address for the default gateway, and
the VMM will use the address when accessing
the local Ethernet segment.
This is the subnet mask for the local Ethernet
segment.
This is the duration (in seconds) of the DHCP
leases that the VMM offers to the attached
Ethernet devices.
The Device Priority provisioning area allows the
operator to set the priority assigned to wireless
messages transmitted by this device. A priority
of 7 is the highest priority setting.
The Geo Settings area allows the operator to
enable and disable the Geo Reporting feature
(if
provisioned),
as well
frequency
of
reports
destination server to which those Geo reports
will be sent. Requires entry of the primary Map
server's IP address. The secondary Map
address is optional.
Vehicle Mounted Modem Users Guide
when
operating
The
RDATE
server
as
control
and
provision
13
Field Default Value
Assigned by
Network
Administrator
172.31.0.20
in
MAC-derived
255.255.0.0
300
Levels
0-7
available, based on
your configuration as
set by the Network
Administrator
Reporting Interval is
set to 10 seconds.
the
the
Section
3.5.
are
Advertisement
Table of Contents
