Extension Name Set - Panasonic KX-TD1232AL User Manual Addendum

004
Description
Selection
Default
Programming
Conditions
38
3.2 User Programming (Manager Programming)

Extension Name Set

Assigns names to the extension numbers programmed in program [003]
"Extension Number Set."
• Jack number: 01 through 64 (-1 / -2) (-1 = first part, -2 = second part)
• Name: 10 characters (max.)
All jacks – Not stored
1. Enter 004.
Display: EXT Name Set
2. Press NEXT.
Display: Jack NO?->
3. Enter a jack number.
To enter jack number 01, you can also press NEXT.
To select the second part (-2), press NEXT after entering a jack number.
Display: #01-1:Not Stored
4. Enter a name.
For entering characters, see "Station Speed Dialing Number/Name
Assignment" in Section 2.2 "Programming."
To delete the current entry, press CLEAR.
To change the current entry, press CLEAR and the new name.
5. Press STORE.
6. To program another jack, press NEXT or PREV, or SELECT and the
desired jack number.
7. Repeat steps 4 through 6.
8. Press END.
• There is a maximum of 128 names for KX-TD1232. Each name has a
maximum of 10 characters.
• Program [003] "Extension Number Set" is used to assign extension
numbers.
• Jack numbers 01 through 32 are for the Master System and 33 through 64
are for the Slave, if available.
• For an explanation of jack numbering, see "Rotation of jack number" on
page 29.