Test Mode - Yamaha CRX-E100 Service Manual

TEST MODE

STANDBY/ON Key is pushed while pushing DISPLAY Key and AUTO/MAN'L Key.
TEST MODE UP
PRESET/TUNING B Key
Test mode number
TEST PROGRAM MODE FUNCTION DESCRIPTION
DISPLAY
01 DEST-B,G Indication for destinaion. (*1)
All FL segments and BACKUP
02 FL+CLEAR
RAM CLEAR.
(Note that memories set by the user
will be erased.)
All FL segments and circuit
03 FL CHECK
board short circuit inspection.
04 FAN[Stop]
Cooling fan drive OUT
Version information of the
05 Ver-Z1.02
microcomputer software. (*2)
05'99.05.28
The date of the microcomputer
software. (*2)
The calculation of SUM is done and
06 SUM[5b4d]
indicated after that. (*2)
(*1)
DESTINATION R (AM9k/FM:50k)
Display R9k
(*2) Contents of indication change by the microcomputer software.
POWER Off condition
TEST MODE indication.
TEST MODE DOWN
PRESET/TUNING N Key
Test mode number
up.
down.
FUNCTION
PRESET/BAND Key
1st : all segments light
2nd : RAM CLEAR
Also, the preset contents of the
tuner are restored to the factory
preset ones.
1st : all segments light
2nd : Even-numbered
segments and even
numbered digits are
turned on.
3rd : Odd -numbered
segments and odd-
numbered digits are
turned on.
Stop/Low/High
It is changed to the date
indication.
It is changed to version
indication.
Re-calculation
R (AM10k/FM100k) A
R10k A
When present mode is
carried out.
PRESET/BAND Key
Executive test mode.
STANDBY/ON Key
PRESET
TIMER
EDIT
STANDBY
PRESET
TIMER
EDIT
STANDBY
PRESET
TIMER
EDIT
STANDBY
B,G U,C J
B, G U, C J
RX-E100
Test mode is
finished.
POWER OFF
The completion
of test mode.
FL CHECK
1st
STEREO AUTO RDS PS PTY RT CT TIMER VOLUME
TUNED MEMORY PTY HOLD SLEEP
2nd
STEREO AUTO RDS PS PTY RT CT TIMER VOLUME
TUNED MEMORY PTY HOLD SLEEP
3rd
STEREO AUTO RDS PS PTY RT CT TIMER VOLUME
TUNED MEMORY PTY HOLD SLEEP
6