Operating Chair Controls
You can do the following operations during a meeting.
Switching the Broadcast Mode
There are two broadcast modes:
4 Split mode
Displays each party on the four-split screen.
Voice Activated mode
Detects the terminal that speaks at the highest level among the
connected terminals, and sends the picture to all the terminals.
The indication [V.A] appears at the lower-left on the monitor
screen in Voice Active mode.
The indication
picture is broadcast.
The default broadcast mode when starting a meeting is
according to the setting in the Multipoint Setup menu.
1
The picture via the
ISDN A jack
The picture of this
terminal
appears on the monitor screen when the local
Press the FAR/NEAR button on the Remote Commander.
The Display Control menu appears.
Display Control
Display
Control
Remote
Chapter 6 Meetings With the Multipoint Function
The picture via the
ISDN B jack
The picture via the
ISDN C jack
Broadcast Mode
4 Split
(Continued)
139