Multipoint Setup Menu - Sony PCS-1600 Operating Instructions Manual

Far End Camera Control: Selects whether the near end
camera is controled or not.
On: Operates the near end camera.
Off: Does not operate the near end camera.
T.120 Data: Selects whether to have a T.120 data meeting.
On: Holds a T.120 data meeting.
Off: Does not hold a T.120 data meeting.

Multipoint Setup Menu

When you have upgraded the system using the optional PCS-
UC160 Upgrade Kit and hold an MCU conference, set up the
Multipoint Setup menu.
Note
The Multipoint Setup menu is displayed only when the system
has been upgraded using the optional PCS-UC160 Upgrade Kit.
Page: 1/1
Multipoint Mode: Set to On when holding a point to multi-
point meeting.
On: Holds a Point to multi-point meeting.
Off: Holds a normal meeting.
Tip
Using the launcher menu, you can also toggle Multipoint
Mode between ON and OFF by holding the joystick on the
Remote Commander all the way to the right.
Broadcast Mode: Selects the broadcast mode.
4 Split: Displays each party on the four-split screen.
Voice Activated: Detects the terminal that speaks at the
Multipoint Setup
Multipoint Mode: Off
Broadcast Mode: 4 Split
Number of Lines: 2B
Restrict: Auto
Video Mode: H.263
Audio Mode: G.728
highest level among the connected terminals, and sends
the picture to all the terminals.
Save Cancel
Chapter 4 Registration and Setup
(Continued)
107