Resetting The Operating Hours Counter For The Grease Filters - Miele DA 7000 D Operating And Installation Instructions

^ When removing the filters for
cleaning, also clean off any residues
of oil or fat from the now accessible
areas of the housing to prevent the
risk of these catching fire.
^ Replace the grease filters.
Resetting the operating hours
counter for the grease filters
After cleaning, the operating hours
counter needs to be reset.
^ Whilst the fan is switched on, touch
the Grease filter sensor l for
approx. 3 seconds until only the 1 is
flashing.
The Grease filter sensor l will go
out.
If the grease filters are cleaned before
the operating hours counter has
reached its maximum:
^ Touch the Grease filter sensor l for
approx. 6 seconds until only the 1 is
flashing.
Cleaning and care
19