Grease Filters - Miele DA 7000 D Operating And Installation Instructions

Cleaning and care

Grease filters

The grease filters should be cleaned at
the latest when the Grease filter sensor
l lights up.
The grease filters should be cleaned
regularly (at least every 3-4 weeks) to
avoid a built-up of grease as this will
make cleaning difficult.
,
An oversaturated filter is a fire
hazard.
^ To take out the grease filters, release
the locking clip on the filter, lower the
filter approx. 45°, unhook it at the
back and remove it.
To avoid damaging the filters or the
cooktop below, make sure you hold
the filters securely at all times when
handling them.
18
Cleaning the grease filters by hand
^ Clean the filters with a soft nylon
brush in a mild solution of hot water
and a little washing-up liquid.
Do not use undiluted washing up
liquid.
Do not use:
– cleaning agents containing
descaling agents,
– powder cleaners, cream cleaners or
abrasive all-purpose cleaning
agents,
– oven sprays.
Cleaning the grease filters in the
dishwasher
^ Place the grease filters in the lower
basket of the dishwasher, ensuring
the spray arm is not obstructed.
^ Do not wash at more than 65 °C. If a
Miele dishwasher is being used,
select the Sensor wash programme.
^ Use a mild dishwasher detergent.
Depending on the cleaning agent
used, cleaning the filters in a
dishwasher can cause permanent
discolouration to the surface.
However, this will not affect the
functioning of the filters in any way.
^ After cleaning, leave the filters to dry
on an absorbent surface before
replacing them.