Motorola 6809518A57-A Quick Start Manual

motorola
H620
Quick Start Guide
1
CHARGE
Your Headset's Battery
1
Verify slide switch is in the off position (toward
the charging port).
2
Plug the Motorola charger into the end of the
headset.
The indicator light turns red or yellow when the
battery is charging. It may take up to 1 minute
for the indicator light to turn on. When the
headset's battery is fully charged (about 2
hours), the indicator light turns green.
3
Disconnect the charger.
Note: Headset is not functional while charging.
Note: This product uses a lithium ion, rechargeable,
non-replaceable battery. Under normal use, the expected life
of the rechargeable battery is approximately 400 charges.

BEFORE YOU BEGIN

Before using this product, read the Important Safety and Legal
Information pamphlet and follow its instructions.
Take a moment before you get started to
familiarize yourself with your new
H620 Headset.
Volume
Buttons
Power
Switch
Indicator Light/
Microphone
2
START BLUETOOTH
FEATURE
Your Phone
Your phone's Bluetooth feature is off by default.
To use your headset, you must turn on the
Bluetooth feature in your phone.
For most Motorola phones (at the main menu):
M
1
Menu > Settings > Connection >
Press ( )
Bluetooth Link > Setup.
2
Scroll to Power.
3 Select Change.
4 Scroll to On.
5
Press Select to turn on the Bluetooth
feature. The Bluetooth feature remains on
until you turn the feature off.
Note: These steps are for most Motorola phones.
For other phones, see your phone's user's guide.
Ear
Speaker
Call
Button
(on side)