Starting The Engine - Toro power max 926 Operator's Manual

•
For best results, use only clean, fresh, unleaded gasoline
with an octane rating of 87 or higher ((R+M)/2 rating
method).
•
Oxygenated fuel with up to 10% ethanol or 15% MTBE
by volume is acceptable.
•
Do Not use ethanol blends of gasoline (such as E15
or E85) with more than 10% ethanol by volume.
Performance problems and/or engine damage may result
which may not be covered under warranty.
•
Do Not use gasoline containing methanol.
•
Do Not store fuel either in the fuel tank or fuel containers
over the winter unless a fuel stabilizer is used.
•
Do Not add oil to gasoline.
Important: To reduce starting problems, add fuel
stabilizer to the fuel all season, mixing it with gasoline
less than 30 days old. Do not add oil to the gasoline.
Note: Do not fill above the bottom of the tank neck.
1. Do not fill above the bottom of the tank neck
Figure 25

Starting the Engine

1. Check the engine oil level. Refer to Checking the
Engine Oil Level in Maintenance.
2. Turn the fuel shutoff valve 1/4 turn counterclockwise
to open it (Figure 26).
3. Insert the ignition key all the way in (Figure 27).
g01881 1
G016498
1. Ignition key
15
G016512
Figure 26
Figure 27
1