Related Manuals for Panasonic EH2473
Summary of Contents for Panasonic EH2473
-
Page 1: Operating Instructions
Operating Instructions Facial Ionic Steamer (Household) EH2473 Model No. English Before operating this unit, please read these instructions completely and save them for future use. - Page 2 ● ● ● ● • • • • ● ● ● ● ● ● ● ● ● ●...
- Page 3 ● ● • • ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●...
- Page 4 ● ● ● ●...
- Page 5 ...
- Page 6 • • • ● ● ● ● ● ● ● ●...
- Page 7 ● ● ● ● ● ● ● ● ● ● ● ● ●...
- Page 8 ● ● ● ● ● ● ● ● ● ● ●...
- Page 9 ● ● ● ● ● ●...
- Page 10 ...
- Page 11 ● ● ● ● ●...
- Page 12 ● ● ● ● ● ● ● ●...
- Page 13 ● ● ● ●...
-
Page 15: Safety Precautions
Safety precautions To ensure proper operation of this appliance, please read carefully all the safety precautions before use. The safety precautions are provided to instruct you with the correct and safe operation of this appliance so that you may avoid injuries to yourself and others as well as damage to property. - Page 16 ● Do not touch or look into the steam outlet during use or within 10 minutes after use. (Because steam is still released (for about 40 seconds) even after the power has been cut off, do not approach the steam outlet.) ●...
- Page 17 If water droplets collect at the outlets and the power is turned on, hot water droplets may splatter causing burns or scalding. ● Do not leave the power connected when not in use. Doing so may result in an accident or personal injury. ●...
-
Page 18: Parts Identification
Parts identification Main body “ ” (stop/start) ... -
Page 19: Before Use
Before use Excessive use is detrimental to the skin. • Start by using the appliance 2 to 3 times a week. Thereafter, adjust the frequency and duration of use while observing the skin condition. If any skin problem develops, stop using immediately. •... - Page 20 ● If the cover fails to open completely, the appliance will not operate because of the safety device. Remove the water supply tank by pushing it. ● When pushing the water supply tank, it will rise slightly. After opening the water supply cap, fill the water supply tank with water up to the full mark.
- Page 21 How to use the ion steamer Insert the plug into a power outlet and press the switch. Only the “ ” lamp blinks. ● Push the “ ” (power) switch firmly. (Even if a click is heard, push it further. If the switch is not pushed far enough, the “ ”...
- Page 22 How to use the hot steam (micro sized ion steam) ● Do not use the steam if it is affected by airflow from an air conditioner. ● The steam may release unevenly, not evenly. This is normal. Use the appliance according to “Recommended basic Basic patterns”...
- Page 23 ● If you do not use any skin care products after using the appliance, moisture on your skin will evaporate, and the skin surface becomes dry. How to use the cool mist (micro mist) ● Release of mist is slightly uneven and the sound (steam release) may fluctuate.
- Page 24 Lamp indication Causes Remedy The appliance is All of the course inclined. (The Set the appliance on a indication lamps are appliance may be set flat surface. blinking. on a waterproof sheet.) The “ ” (hot steam) lamp is No water. Supply the water.
- Page 25 Recommended basic patterns Solving your concerns to produce beautiful, healthy skin Warm and cool cosmetic programs — Three Warm/Cool courses (The indicated time is for reference only) Clear skin course Press the “ ” (stop/start) switch when “ ” lamp blinks. Removing Face Warm...
-
Page 26: After Use
Calming down and skin preparation Apply lotion to prepare your facial skin and apply emulsion to supplement the skin oil. ● The Hot steam course will stop automatically after 12 minutes. ● After the deep cleansing and the massage care, press the “ ”... - Page 27 Remove the water from the appliance by pressing the drain button. ● Return the appliance to a flat position and repeat the steps above 2 to 3 times to ensure that all water is completely drained from the appliance. ● When discarding the water, do not get water on the plug and power cord.
- Page 28 Reinstall the water supply tank and close the cover. ● Confirm the click. Remove the water from the appliance by pressing the drain button. ● Return the appliance to a flat position and repeat the steps above 2 to 3 times to ensure that all water is completely drained from the appliance.
-
Page 29: Specifications
Specifications Product name Facial Ionic Steamer Product model EH2473 Power supply 220V 50Hz Power consumption 334W Weight Approx. 1.7kg Steam discharge rate Approx. 6ml/min. Approx. 15min. (When selecting Steam mist discharge time Clear skin course) Approx. 40˚C Steam temperature (at a distance of approx. 20cm from... - Page 30 MEMO...
- Page 31 MEMO...
- Page 32 MEMO...
- Page 33 EH2473 EH2473 EH2473 EH2473 EH2473 EH2473...
- Page 35 MEMO...