Starter Hub Removal; Flywheel Magneto Removal; Service Points - Yamaha F20A Service Manual

POWR
Å
ı
Å
FLYWHEEL MAGNETO
ı

SERVICE POINTS

Starter hub removal

1. Remove:
Starter hub
Universal clutch holder:
YM-91042/90890-04086

Flywheel magneto removal

1. Remove:
Flywheel magneto nut
Flywheel holder:
YB-06139/90890-06522
Å For USA and CANADA
ı Except for USA and CANADA
CAUTION:
The major load should be applied in the
direction of the arrows. If the load is not
applied as shown, the flywheel holder may
easily slip off.
2. Remove:
Flywheel magneto
Universal puller:
YB-06117/90890-06521
Å For USA and CANADA
ı Except for USA and CANADA
CAUTION:
Keep the nut side flush with the crank-
shaft end until the flywheel magneto
comes off the tapered portion of the
crankshaft.
To prevent damage to the engine or
tools, screw in the universal-puller set
bolts evenly and completely so that the
universal puller plate is parallel to the fly-
wheel magneto.
5-5
E