Playing Media - AEG DVD 4615 HC Instruction Manual

English
54
Using the remote control
Loading a CD/DVD
Understanding the
onscreen CD-menu
Understanding the
onscreen DVD-menu
Starting the replay
Interrupting the replay
05-DVD 4615 HC_GB.indd 54 05-DVD 4615 HC_GB.indd 54

Playing media

You transmit commands to the DVD-Player via remote control. It is thus
important to point the end of the remote control towards the DVD-Player.
1. Press the remote control button
tray opens.
2. Place the CD/DVD on the tray.
3. Press the remote control button
CD/DVD tray closes. The display (Fig. 1/2) fi rst shows „LOAd". After a
short while the type of the loaded medium is displayed (e.g. „DVD").
When playing CDs the following status information is displayed on screen:
Current track/total number of tracks (1).
Time (2): This provides information about the duration and the
remaining play time. By standard the play time expired of the current
track is displayed. The display is in hours, minutes and seconds. Press
the OSD-button (Fig. 3/30) once or several times to have further times
displayed.
The following possibilities are available for selection
- time remaining to the end of the track,
- playback time of the CD so far,
- time remaining to the end of the CD.
When playing DVDs you can view the on-screen menu by pressing the
OSD-button (Fig. 3/30).
DVD-menu
Current title/total number of titles (1).
Current chapter/total number of chapters (2).
Time (3): This provides information about the duration and the
remaining play time. By standard the play time expired of the current
title is displayed. The display is in hours, minutes and seconds. Press
the OSD-button (Fig. 3/30) once or several times to have further times
displayed. The following possibilities are available for selection
- time remaining to the end of the
- expired playing time of the
- time remaining to the end of the
1. Place the CD/DVD on the CD/DVD-tray ➯ Page 54, „Loading a CD/
DVD".
2. Press the „ II"-button (Fig. 3/3) on the remote control.
NOTE:
If the replay does not start or the replay is of poor quality, you should
check the default settings of the DVD-Player.
1. Press the „ II"-button (Fig. 3/3) on the remote control. The replay is
interrupted, the currently visible image is „frozen".
2. Press the „ II"-button (Fig. 3/3) on the remote control to restart the
„normal" replay.
OPEN/CLOSE (Fig. 3/19). The CD/DVD
OPEN/CLOSE (Fig. 3/19) again. The
title,
chapter,
chapter.
21.05.2008 8:08:27 Uhr 21.05.2008 8:08:27 Uhr