Assigning The Print Queue; Changing The File Server - Sharp AR-P13 Service Manual

3.3.5

Assigning the Print Queue

(1) Select a created printer and press the [Enter] key.
(2) Printer XXXXX Configuration (XXXXX is the name of the printer created) appears.
(3) Enter printer number at [Printer number].
(4) Select the Parallel at [Printer Type] and press [Enter] key.
(5) Choose [Other/Unknown] from Printer Type and press the [Enter] key.
(6) Choose [See List of Assign Print Queues] and press the [Enter] key.
(7) NetWare Server\Print Queue appears.
(8) Press the [Insert] key.
(9) Select a created queue from [Available Print Queues] and press the [Enter] key.
• Up to 10 queues can be selected. When more than one queue is to be selected, the priority must be decided in
advance.
(10) Enter the priority and press the [Enter] key.
(11) The queue is assigned.
• When assigning more than one queue, repeat steps 5 through 9.
(12) Press the [Esc] key twice.
(13) When [Save Changes?] appears, choose [Yes] and press the [Enter] key.
(14) Press the [Esc] key four times.
(15) When [Exit?] appears, choose [Yes] and press the [Enter] key.
3.4

Changing the File Server

A file server can be specified as the current file server. To change the file server, use the following procedures:
(1) Log into the current file server and start the PCONSOLE utility.
(2) Select the [Change Current File Server] at the [Available Options] menu.
(3) Press the [Insert] key to display the list of available file servers.
(4) Select the file server to be set as the current file server, then press [Enter].
(5) Enter your user name and press the [Enter] key. If the user name requires a password, the Password screen is
displayed. Enter the password and press [Enter].
(6) Select [Change Current File Server] at [Available Options] menu. The list of connected file servers is displayed.
(7) Select the current file server from the [File server/Username] screen.
3-11