Setting Up The Digital Scanner; Standard Model - Motorola DS6708 Product Reference Manual

Setting Up the Digital Scanner

Standard Model

Installing the Interface Cable
Plug the interface cable modular connector into the cable interface port on the bottom of the scanner
1.
handle (see Figure
Gently tug the cable to ensure the connector is secure.
2.
Connect the other end of the interface cable to the host (see the specific host chapter for information on
3.
host connections).
Installing the Cable
Figure 1-3
NOTE Different hosts require different cables. The connectors illustrated in each host chapter are examples only.
Connectors vary from those illustrated, but the steps to connect the digital scanner are the same.
Removing the Interface Cable
Using the tip of a screwdriver, depress the cable's modular connector clip.
1.
Removing the Cable
Figure 1-4
Carefully slide out the cable.
2.
Follow the steps for
3.
1-3).
Clip
Cable interface port
Interface cable modular
connector
To host
Installing the Interface Cable to connect a new cable.
Getting Started 1 - 3