Operation Of Pip And Pop - Mitsubishi WD-52528 Owner's Manual

Operation of PIP and POP

Display programs from analog channels, analog inputs
or devices as Picture-In-Picture (PIP) and Picture-
Outside-Picture (POP). The TV has a second analog
tuner for non-scrambled analog channels received on
Ant-1 and will display them as the PIP/POP sub-pictures.
Digital channels and devices can be shown as the main
picture but cannot be the sub-picture. To turn PIP/POP
off, wait at least 10 seconds, and press PIP/POP. The
next time you activate PIP/POP, the last used PIP/POP
option will be displayed.
Changing PIP/POP Device
Press PIP DEVICE to change the PIP or POP picture
source device. A menu similar to the Device Selection
menu will be displayed.
Changing PIP/Side-by-Side Channels
Press PIP CH to scroll up and down through memorized
channels on Ant-1 or a cable box.
Exchanging Program Images
Press ENTER/EXCH (WD-52527, WD-62527) or EXCH
(WD-52528, WD-62528) to exchange the main picture
and the PIP/POP picture. Pictures from digital channels
can only be shown as the main picture.
Moving PIP Image
If no menus are on the screen, press ADJUST
or to move the PIP display anywhere on the main
screen.
Automatic POP Switching
(WD-52528, WD-62528)
When automatic POP switching is active, the TV will
cycle through memorized analog channels on Ant-1 or
strobe pictures from other A/V components in the POP
display. Press PAUSE to pause or restart automatic
POP switching.
Selecting POP "Live" Image
(WD-52528, WD-62628)
Press PAUSE to stop automatic cycling through
channels, then press ADJUST
different POP "live" image.
Freezing the PIP and Side-By-Side Picture
Press PAUSE to freeze the PIP and side-by-side images.
Press PAUSE again to return to a "live" image.
78
Chapter 5. TV Menu Screen Operations
, ,
, , or to select a
Press PIP/POP to activate the PIP/POP option. With
each press of the PIP/POP button on the TV remote
control (within 3 seconds of each other), the PIP/POP will
cycle through the following display options:
MAIN
Side-by-Side
PICTURE
MAIN
PICTURE
Ant-1 2 XXXX
Standard
Stereo SAP
TV-PG DLSV
SQV1
Ant-1 2 XXXX
Standard
Stereo SAP
TV-PG DLSV
SQV1
IMPORTANT
Side-by-Side cannot show the same channel
or device on both sides.
When Ant-1 or Ant-2 is the main picture,
Ant-2 is not available as the PIP, POP or Side-
by-Side.
• POP
side-by-side
pictures
• 3 POP
POP 1
(WD-52528,
WD—62528)
POP 2
POP 3
PIP Ant-1 17
• PIP
PIP
• PIP/POP: off