How Connections Affect The Pip And Pop - Mitsubishi WD-52327 Owner's Manual

How Connections Affect the PIP (Picture-In-Picture) and POP
(Picture-Outside-Picture)
To see a picture in the PIP or POP, you may need to select an input source. If the only input connected is ANT-A,
then both the main picture and the PIP/POP will be from that input source. If other video equipment is connected,
you may be able to view these input sources as the PIP/POP. When connecting your new Mitsubishi TV, it is
important to understand which main picture and PIP/POP input sources can and cannot be used together. The
table on this page shows which inputs can and cannot be used together and the limitations they may have. If you
press the INFO button it will display the current Input, signal (480i, 480p, or 1080i), format, time, day and sleep
time.
See Operation of PIP and POP, page 56, for operating instructions.
PIP/POP
Main
Ant-A
Ant-B
DTV
480i, 480p, 1080i
Input-1
Input-2
Input-3
Components
(Comp-1, -2)
480i, 480p, 1080i
MonLink/DVI
* No Side-by-Side with the same channel
**No Side-by-Side with the same input
20
Ant-A Ant-B
OK* No PIP/POP
OK OK*
OK OK
OK OK
OK OK
OK OK
DTV Input-1
480i, 480p, Input-2
1080i Input-3
OK OK
OK OK
OK** OK
OK OK**
OK OK
OK OK
Components
(Comp. -1, -2)
480i. 480p, 1080i
OK
OK
OK
OK
OK**
OK