Usb Device Playback - Russound DMS-3.1 Installation Manual

If used with an MCA-Series controller, the DMS-3.1 can be used to play audio
files directly from a connected USB 2.0-compliant storage device. The three
USB ports are each associated with one of the three streaming modules in the
DMS-3.1. The front panel USB port corresponds to stream 1 while stream 2 and
stream 3 have USB ports on the back panel. Content connected to a particular
USB port is only available to its associated stream output. The USB storage
device used must be formatted for a FAT16 or FAT32 file system. These are the
most common file storage systems used today.
To the Power Outlet USB cable
External USB drive
RCA cables
Connections for USB drive output
Russound DMS-3.1 Installation Manual
Note: The menu structure for DMS-3.1 navigation of a USB storage device is
determined by that device. The DMS-3.1 filters the files based on supported
audio file types so any photo or movie files will not be shown. However, folders
may be visible which are not related to audio file playback.
The USB ports are not powered. If an External Hard Drive is connected via an
USB port, it must have its own power supply.
Front-panel USB port
(outputs on Stream 1)

USB DEVICE PLAYBACK

DMS-3.1 Streamer
MCA-88 Controller
9