Extension Cords - Black & Decker BDPS400 Instruction Manual

when in doubt as to whether the product is properly grounded. Do not modify the plug provided; if it does not fit the
outlet, have the proper outlet installed by a qualified electrician. modify the plug provided; if it does not fit the outlet,
have the proper outlet installed by a qualified electrician.
Use only a 3-wire extension cord that has a 3-blade grounding plug and a 3-slot receptacle that will accept the plug on
the product. Make sure your extension cord is in good condition. When using an extension cord, be sure to use one
heavy enough to carry the current your product will draw. An undersized cord will cause a drop in line voltage resulting
in loss of power and overheating. If an extension cord is to be used outdoors, it must be marked with the suffix W-A
after the cord type designation. For example, a designation of SJTW-A would indicate that the cord would be
appropriate for outdoor use. For proper size cords see chart below.
Some spray materials contain chemicals known to the State of California to cause cancer, birth
WARNING:
defects or other reproductive harm. To reduce your exposure wear appropriate safety equipment such as face masks,
gloves, and other appropriate protective equipment. Please review and follow the safety precautions on the paint
container.

EXTENSION CORDS

Minimum Gauge for Cord Sets
Volts Total Length of Cord in Feet
120V 0-25 26-50
(0-7,6m) (7,6-15,2m) (15,2-30,4m) (30,4-45,7m)
240V 0-50 51-100
(0-15,2m) (15,2-30,4m) (30,4-60,9m) (60,9-
91,4m)
Ampere Rating
More Not more American Wire Gauge
Than Than
0 - 6 18
6 - 10 18
10 - 12 16
12 - 16 14
51-100 101-150
101-200 201-300
16 16 14
16 14 12
16 14 12
12 Not Recommended
5