Table of Contents
Advertisement
SETTING TIGHT OR NORMAL SQUELCH
(CONVENTIONAL OPERATION ONLY)
Use this feature to filter out nuisance
(unwanted) calls and/or background noise.
However, tightening squelch could cause calls
from remote locations to be filtered out as well.
In this case, normal squelch may be more
desired.
To select tight or normal squelch:
Press the preprogrammed Squelch button
(see page 12) to toggle between tight and
normal squelch,
–or–
Do the following:
) to enter menu mode.
+ or ? until
) to select
+ or ? until
SETTING THE POWER LEVEL
Each channel in your radio has a predefined
transmit power level that can be changed.
•
•
Utilities
•
Utilities
Squelch
) to select
Squelch
+ or ? until
Sqlch Tight?
–or–
Sqlch Normal?
until
) to confirm the selection.
High power (S) allows you to reach a radio
that is farther away.
Low power (R) conserves the battery's
charge.
Auto power (conventional operation only)
automatically sets the optimal power level
based on the strength of the signal
received. If the received signal is weak, the
transmit level will be set to high, and vice
versa.
B
53
English
Hide quick links:
Advertisement
Table of Contents
