Operation; Using The Timer - Buffalo GF256 Instruction Manual

Telephone Hotline: 0845 146 2887 (UK)
Seasoning
The cooking plate surfaces need to be 'seasoned' before using for the first time.
1. Ensure the cooking surfaces are clean.
2. Brush the surfaces with cooking oil.
3. Set the thermostat(s) to 110°C and turn the appliance On. The power indicator light turns
on.
4. Once the appliance reaches temperature the power indicator light turns off.
5. Turn the appliance Off and allow the to cool before wiping away any excess oil.
6. The appliance is now ready to use.

Operation

1. Close the plates.
NOTE: It may be necessary to slightly grease the plates with cooking oil before cooking
depending on the foodstuff.
2. Set the thermostat(s) to the desired temperature (60°C-300°C) and turn the appliance
On. The power indicator light(s) turn on.
NOTE: 185°C is suitable for general waffle cooking.
3. The power indicator light(s) turn Off when the appliance has reached the set
temperature.
4. Lift the top plate and place the waffle mix on the bottom plate.
5. Lower the top plate.

Using the Timer

The digital timer with audible alarm can be set from 1 second to 15 minutes.
NOTE: The timer provides an audible alarm after the set time expires. It provides
no electrical control over the unit.