ASSEMBLY
UNPACKING
This product has been shipped completely assembled.
Carefully remove the product and any accessories from
the box. Make sure that all items listed in the packing list
are included.
Inspect the product carefully to make sure no breakage
or damage occurred during shipping.
Do not discard the packing material until you have care-
fully inspected and satisfactorily operated the product.
If any parts are damaged or missing, please call
-866-539-70 for assistance.
PACKING LIST
8 Volt / 4 Volt Radio
Operator's Manual
OPERATION
This product will accept RIDGID 4 V lithium-ion battery
packs, RIDGID 8 V lithium-ion battery packs and RIDGID
8 V nickel-cadmium battery packs.
For complete charging instructions, refer to the Operator's
Manual for the battery packs and chargers listed in the
General Safety Rules of this manual.
INSTALLING/REMOVING THE BATTERY
PACK
See Figure 2.
Place the battery pack in the radio, aligning the raised rib
on the battery pack with the groove in the battery port.
Make sure the latches on each side of the battery pack
snap into place and the battery pack is secured to the
radio before operation.
Depress the latches on both sides of the battery pack to
release and remove the battery pack.
WARNING:
If any parts are damaged or missing do not operate
this product until the parts are replaced. Failure to
heed this warning could result in serious personal
injury.
WARNING:
Do not attempt to modify this product or create
accessories not recommended for use with this
product. Any such alteration or modification is
misuse and could result in a hazardous condition
leading to possible serious personal injury.
WARNING:
To prevent accidental starting that could cause
serious personal injury, always remove the battery
pack from the product when assembling parts.
latcHeS
grooveS
7
18v litHium-ion
battery pack
Fig.