Basic Operations - Pioneer MVH-X385BT Owner's Manual

Important
• Leaving the unit on standby to connect to your phone via Bluetooth while the engine is
not running can drain the vehicle's battery.
• Be sure to park your vehicle in a safe place and apply the parking brake before operation.
To make a phone call
1
Press to display the phone menu.
When two phones are connected, a phone name appears first then a phone
menu will display. To switch to another phone, press
2
Turn the M.C. dial to select [RECENTS] or [PHONE BOOK], then press to
confirm.
If you select [PHONE BOOK], proceed to step 4.
3
Turn the M.C. dial to select [MISSED], [DIALLED] or [RECEIVED], then
press to confirm.
4
Turn the M.C. dial to select a name or phone number, then press to
confirm.
The phone call starts.
To answer an incoming call
1
Press when a call is received.
TIP
When two phones are connected to the unit via Bluetooth and there is an incoming call
while one phone is being used for a call, a message will appear in the display. To answer that
incoming call, you need to end the existing call.

Basic operations

Purpose Operation
End a call Press
Reject an incoming call Press and hold
Switch between the current Press the M.C. dial.
caller and a caller on hold
again.
.
when a call is received.
Purpose Operation
Cancel a caller on hold Press and hold
Adjust the volume of the Turn the M.C. dial during the call.
caller's voice (When private
mode is on, this function is not
available.)
Turn the privacy mode on or Press BAND/
off
To preset phone numbers
1
Select a phone number from a phone book or call history.
2
Press and hold one of the number buttons (1/
The contact is stored in the selected preset number.
To make a call using a preset number, press one of the number buttons (1/
to 6/ ), then press the M.C. dial.
Voice recognition (Only for iPhone)
(Not available for MVH-285BT)
This function is only available when an iPhone equipped with voice
recognition is connected to the unit via Bluetooth.
1
Press and hold to activate the voice recognition mode.
2
Press the M.C. dial and then talk into the microphone to input voice
commands.
To exit the voice recognition mode, press BAND/
NOTE
For details on the voice recognition features, refer to the manual supplied with your iPhone.
.
or BAND/ during the call.
to 6/ ).
.
11
En