Re-Setting The Grease Filter Timer - Miele DA5000D Operating And Installation Instructions

Depending on the detergent,
cleaning the grease filters in a
dishwasher may cause permanent
discoloration of the filter surface.
Performance of the filter is not
affected by this discoloration.
^ After cleaning, the filters can be
placed on a towel to air dry.
^ While the filters are removed, clean
any dirt or grease from the filter
casing.
^ There is a groove on both sides of
the canopy, to collect grease. These
grooves and the retainers for the
grease filter should be cleaned every
time the filter itself is cleaned.
^ Put the grease filter back in place.
^ Touch any sensor button from "1" to
"4". The fan turns back on.
Cleaning and care
Re-setting the grease filter
timer
Each time you clean the grease filter
re-set the counter.
^ Touch the "s" sensor button to turn
on the fan.
^ Press and hold the "l" sensor button
for approx. 3 seconds, until only the
sensor button "1" is flashing.
The light for sensor button "l" will go
out.
If you clean the grease filter before the
counter reaches the maximum number
of hours:
^ Press and hold the "l" sensor button
for approx. 6 seconds, until only
sensor button "1" is flashing.
17