Indirect Lighting; Safety Cut-Off; Grease Filter Timer L - Miele DA5000D Operating And Installation Instructions

Indirect lighting

Touch the " " sensor button to turn the
indirect lighting On/Off.

Safety cut-off

If the exhaust hood is left unattended
for more than 10 hours, the fan
automatically turns off. The lighting
remains on.
^ Touch the "s" sensor button to turn
the fan back on again.

Grease filter timer l

The appliance records how many hours
the exhaust hood has been in
operation.
The grease filter timer will signal when
the grease filter needs to be cleaned.
After approx. 30 hours of operation, or
the pre-selected operating time, the
"l" sensor button will light. This means
it is time to clean the grease filter.
After cleaning, the timer will need to be
re-set (see "Cleaning and care").
Checking the grease filter timer
To check the percentage of time
already used:
^ Touch the "s" sensor button to turn
on the fan.
^ Hold down the "l" sensor button.
One or more of the sensor buttons
"1" to "4" will flash.
The number of flashing sensor buttons
indicates the percentage of operating
time already passed.
Sensor button "1"
Sensor buttons "1" and "2" = 50 %
Sensor buttons "1" to "3"
Sensor buttons "1" to "4"
This information will remain stored in
memory in the event of a power failure.
Operation
= 25 %
= 75 %
= 100 %
13