Table of Contents
Advertisement
Select RAID from the Logical Drive menu, then press <Enter>.
6.
Select the RAID level from the menu, then press <Enter>.
7.
You need at least two identical hard disk drives when creating a RAID 1 set.
LSI Logic Software RAID Configuration Utility Ver A.51 Aug 13, 2007
Management Menu
Configure
Initialize
Objects
Rebuild
Check Consistency
Use Cursor Keys To Navigate Between Items And Press Enter To Select An Option
When creating a RAID 1 set, select DWC from the Logical Drive menu, then
8.
press <Enter>.
When creating a RAID 0 set, proceed to step 10.
Select On to enable the Disk Write Cache setting, then press <Enter>.
9.
LSI Logic Software RAID Configuration Utility Ver A.51 Aug 13, 2007
Management Menu
Configure
Initialize
Objects
Rebuild
Check Consistency
Use Cursor Keys To Navigate Between Items And Press Enter To Select An Option
Enabling DWC can improve the performance, but with the risk of data loss.
6-8
Logical Drive(s) Configured
LD
RAID
Size
Easy Configuration - ARRAY SELECTION MENU
0
1
77247MB
0
DNLIN A00-00
1
DNLIN A00-01
Logical Drive 0
RAID = 1
Size = 77247MB
DWC = Off
RA
= On
Accept
SPAN = NO
Choose RAID Level For This VD
Logical Drive(s) Configured
LD
RAID
Size
Easy Configuration - ARRAY SELECTION MENU
0
1
77247MB
0
DNLIN A00-00
1
DNLIN A00-01
Logical Drive 0
RAID = 1
Size = 77247MB
DWC = Off
RA
= On
Accept
SPAN = NO
Disk Write Cache Setting Of VD
#Stripes
StripSz
2
64 KB
PORT #
RAID Level
RAID 0
RAID 1
#Stripes
StripSz
2
64 KB
PORT #
Change DWC
Off
On
Status
ONLINE
Status
ONLINE
Chapter 6: RAID configuration
Advertisement
Table of Contents
