• Press MENU to confirm. The display will show
CELLULAR READY?
.
• Refer to section 4.1.1 to proceed with the next steps.
NOTE
When pairing a new cellular, the connected cellular will
be disabled temporarily.
4.1.3
Paired Devices
The cellular(s) paired will be displayed in the paired
devices list, whether or not connected. Connect, or
remove the cellular from this menu.
1. Press MENU and then VOL+ or REDIAL/VOL- to
PAIRED DEVICES
select
2. Press MENU. The display will show the Cellular
name of paired device(s).
NOTE
NO PAIRED DEVICE
Display will show
paired.
3. Press VOL+ or REDIAL/VOL- to select the desired
cellular device.
For the connected cellular device:
4. Press MENU to remove the cellular device.
5. Press MENU to confirm.
36
.
if there is no device
For the cellular phone that is not connected:
4. Press MENU and then VOL+ or REDIAL/VOL- to
CONNECT
REMOVE CELLULAR
select
or
5. Press MENU to confirm. If you select
CELLULAR
, press MENU again to confirm.
NOTE
• When the connected cellular is removed,
corresponding device
• When the disconnected cellular is connected,
corresponding device
• When the cellular is removed, the device name will
EMPTY
be removed and
the paired device list.
4.2
Making a home call using your
landline
1. Enter the phone number and press
/SPEAKER to dial the phone number.
4.3
Making a cellular call using your
cordless DECT handset
If there is only one Bluetooth enabled mobile phone
paired and connected,
1. Enter the phone number, and then press
CELLULAR to dial out.
.
REMOVE
or
will be off.
or
will be on.
will be displayed instead in
/FLASH or
/
Using the phone