Table of Contents
Advertisement
I
NSTALLATION
EAS D
EACTIVATION
SW1 and SW2 are the switch banks inside the Checkpoint device that set the deactivation range. The following is a list of
Checkpoint recommended switch bank settings.
Base Model
Checkpoint Recommended Switch Bank Settings
MS2320
SW1 & SW2 switches 1 and 6 set to ON
All StratosH models have a connector labeled EAS In on the bottom of the unit. Honeywell has an optional EAS cable
(
52-52511x) available for purchase for connection between the Checkpoint device and the StratosH.
PN
Figure 24. EAS Cable Connection (Bottom of StratosH)
The following figure shows the location of the EAS deactivation area for the StratosH. It is important to pass the entire tag
through this area to deactivate the security tag.
Figure 25. EAS Deactivation Area
24
Advertisement
Table of Contents
