Panasonic SC-HT730 Operating Instructions Manual page 8

5
STEP
System cable
≥Connect the AC power supply cord after all other connections are complete.
≥Optional antenna connections (‹ page 25).
FM indoor antenna
Adhesive tape
Affix this end of the
antenna where
reception is best.
Main unit
DIGITAL
TRANSMITTER
A
System cable
Conserving power
The main unit consumes a small amount of power, even when it is turned off (For U.S.A. and Canada: approx. 0.5 W or for other areas: approx.
0.9 W). To save power when the unit is not to be used for a long time, unplug it from the household AC outlet.
You will need to reset some memory items after plugging in the unit.
[Note]
The included AC power supply cord is for use with this unit only. Do not use it with other equipment.
Set your surround sound free!
Panasonic SH-FX50 Digital Transmitter and Receiver (optional)
When you insert the digital transmitter into the DIGITAL TRANSMITTER slot of the main unit and connect the surround speakers to the
receiver, you can enjoy surround speaker sound wirelessly.
For details, please refer to the operating instructions for Panasonic SH-FX50 Digital Transmitter and Receiver.
RQT7972
8
Radio and system connections
AM loop antenna FM indoor antenna
Click!
FM ANT FM ANT
TV
VCR
(7 (75≠ )
AUDIO
AUDIO
IN IN
L
AM ANT AM ANT
LOOP LOOP
R
EXT EXT
Catch up
To disconnect
Press the catch
and pull out.
Active subwoofer
AC power supply cord
\U.S.A.\and\Canada]
AM loop antenna
Stand the antenna up on its base.
Place the antenna where reception is best.
Keep loose antenna cable away from other
wires and cables.
COMP
P
B
1
P
R
2
Catch up
To disconnect
Press the catch
and pull out.
Power plug adaptor
\Others] \Areas\except\U.S.A.\and\Canada]
The illustration shows SC-HT730.
[For[areas[except[U.S.A.[and[Canada[
Before connecting the AC
power supply cord
Set the voltage.
127 V 110 V 220 V-230 V
VOLT ADJ
Use a flat-head screwdriver to turn the
voltage selector on the back of the
subwoofer to the appropriate position for
the area in which this system is used.
If the power supply in your area is 115 V or
120 V, please set the voltage selector as
follows:
≥For 115 V: Set to 110 V.
≥For 120 V: Set to 127 V.
AC power supply cord
[For\areas\except\U.S.A.\and\Canada]
≥If the power plug does not fit
your AC outlet
Use the power plug adaptor
(included).
To household
If it still doesn't fit, contact an
AC outlet
electrical parts distributor for
assistance.
\For\U.S.A.\and\Canada]
240 V