Polaris IDD Quick Start Manual page 64

Update the IDD
1. Before updating the IDD, always export your existing
tracks and waypoints to a USB drive to avoid losing
them. When the IDD update is performed, all formerly
saved tracks and waypoints will be erased from the
IDD.
2. After downloading an update from your RiderX
account and saving the extracted files to the USB
flash drive, connect the flash drive to the USB
connector on your vehicle. For vehicle USB connector
locations, see page 58.
NOTE: Always download the most recent data from
RiderX.com before updating the IDD.
3. Turn the ignition key to the ON/RUN position. If your
vehicle does not have a battery, start the engine and
allow the idle to stabilize before continuing. Do not
allow an engine to run in an enclosed area without
adequate ventilation.
4. Press any display key to display the IDD screen
icons.
5. Press Key 3 to display the main menu options.
6. Toggle to System Settings. Press Key 3 to select.
7. In the System Settings menu, select SYSTEM INFO.
Key 1 Key 2 Key 3 Key 4
63
Key 5