Connect, Register And Update - Polaris IDD Quick Start Manual

Connect, Register and Update

Connect Your Smartphone to the IDD
The Polaris IDD can be used with most smartphones.
RiderX can be used to provide trail data for the IDD
device. Before registering and connecting the IDD to
RiderX, use the following steps to connect your
smartphone to the IDD.
1. Open your phone's Bluetooth menu and make your
phone discoverable.
2. On the vehicle, turn the ignition key to the ON/RUN
position. The engine does not have to be running.
3. View the Bluetooth settings on your phone. The
Polaris IDD Connect Bluetooth Adapter should
appear as "Polaris - # # # #" (the last 4 digits of the
adapter's address).
4. When the adapter is visible, select it to connect your
phone to the adapter.
5. Launch the Polaris IDD and verify that the connection
status bar indicates the phone is connected.
Register for a RiderX Account
1. If you don't already have a RiderX account, go to
RiderX.com.
2. Click Sign In at the upper right corner of the page.
3. Scroll down and complete the online form to register
for a free account.
NOTE: Multiple IDD devices can be registered to the
same RiderX account. Additional accounts are not
required for multiple devices.
60