Locating The Rating Label - HP K1M38AA User Manual

NOTE: You can disable the power LED in the OSD menu. Press the Menu button on the right side
of the monitor, and then select Power Control > Power LED > Off.
When the monitor is powered on, a Monitor Status message is displayed for five seconds. The
message shows which input is the current active signal, the status of the auto-switch source setting
(On or Off; factory default is On), the current preset display resolution, and the recommended preset
display resolution.
The monitor automatically scans the signal inputs for an active input and uses that input for the
display.

Locating the rating label

The rating label on the monitor provides the product number and serial number. You may need these
numbers when contacting HP about the monitor model. The rating label is located on the bottom of
the monitor.
14 Chapter 3 Setting up the monitor