Table of Contents
Advertisement
3
Setting up the monitor
To set up the monitor, ensure that the power is turned off to the monitor, computer system, and other
attached devices, and then follow the instructions below.
Use caution when setting up the monitor
CAUTION:
on the panel may cause non-uniformity of color or disorientation of the liquid crystals. If this occurs
the screen will not recover to its normal condition.
CAUTION:
the display panel may damage the panel if the monitor is placed face down.
Installing the stand
TIP:
Consider the placement of the monitor, because the bezel might cause interfering reflections
from surrounding light and bright surfaces.
1.
Lift the monitor from its box and place it
CAUTION:
of the display panel may damage the panel if the monitor is placed face down.
2.
Slide the stand into the slots in the base until it locks in place.
4
Chapter 3 Setting up the monitor
To prevent damage to the monitor, do not touch the surface of the LCD panel. Pressure
Do not lay the monitor face down when installing the stand. Stress on the curvature of
Do not lay the monitor face down when installing the stand. Stress on the curvature
face up on a flat surface covered by a clean, dry cloth.
Advertisement
Table of Contents
