Sharp FU-A28TA Operation Manual page 15

OPERATION
OM_FU-A28TA_EN+TH.indb Sec1:5 OM_FU-A28TA_EN+TH.indb Sec1:5
Press the Power ON/OFF Button to start
1
operation.
• Plasmacluster Indicator Light and Fan Speed
Indicator Light turn on.
• Unless the power cord has been unplugged, the
operation starts in the previous mode it was
operated in.
2
Press the Mode Button to set the desired
2
fan speed.
[Operation]
3
[Display]
1
4
Press the MODE Button for 3 seconds when the light
on the front panel is too bright.
• Fan Speed Indicator (Display) will turn off/on.
Press the Plasmacluster Ion ON/OFF But-
3
ton to turn Plasmacluster Ion Mode ON
and OFF.
When Plasmacluster is ON, the Plasmacluster
Indicator Light will turn on.(blue)
Press the Power ON/OFF Button to stop
4
operation.
Plasmacluster Indicator Light and Fan Speed Indicator
Light turn off.
E-5
6/30/11 3:32:45 PM 6/30/11 3:32:45 PM