Sharp FU-A28TA Operation Manual page 14

FILTER INSTALLATION
To maintain the quality of the filter, it is installed in the main unit and packed in plastic
bag. Be sure to remove the filter from the plastic bag before using the unit.
Remove the Back Panel.
1
Upper Tabs
Remove the plastic bag from
2
the Filter.
Place the Filter within the main
3
unit.
Do not install the filter backwards or the
unit will not operate properly.
OM_FU-A28TA_EN+TH.indb Sec1:4 OM_FU-A28TA_EN+TH.indb Sec1:4
4
Pull
5
E-4
Be sure to remove the power plug
from the wall outlet.
Replace the Back Panel to the
main unit.
Push
Fill in the usage start date on the
Date Label.
Use the date as a guide for the filter re-
placement schedule.
Starting date of use
• Do not operate the unit without the filter.
Date Label
6/30/11 3:32:43 PM 6/30/11 3:32:43 PM