Table of Contents
Advertisement
8
Place the back of the cradle on the mounting bracket or other mounting
3.
device/surface, with the four holes in the back of the cradle aligned with the
four holes in the mounting surface.
Insert the four self-locking screws through the holes in the mounting surface,
4.
into the back of the cradle.
Symbol recommends using #8 washers to protect the mounting surface.
CAUTION
Sample Mounting
Configuration
Do not install the cradle on or near an air bag cover plate or
within an aerobic zone. Also, do not install it in a location that
affects vehicle safety or driving ability.
VCD9000 Cradle
Advertisement
Table of Contents
