Residual Risks - Black & Decker WBV1450 Original Instructions Manual

Children should be supervised to ensure that they do not
u
play with the appliance.

Residual risks.

Additional residual risks may arise when using the appliance/
tool which may not be included in the enclosed safety warn-
ings. These risks can arise from misuse, prolonged use etc.
Even with the application of the relevant safety regulations
and the implementation of safety devices, certain residual
risks can not be avoided. These include:
Injuries caused by touching any rotating/moving parts.
u
Injuries caused when changing any parts, blades or ac-
u
cessories.
Injuries caused by prolonged use of an applianmce/tool.
u
When using any tool for prolonged periods ensure you
take regular breaks.
Impairment of hearing.
u
Health hazards caused by breathing dust developed when
u
using your tool (example:- working with wood, especially
oak, beech and MDF.)
Electrical safety for model WBV1405P
@
Warning! This product must be earthed.
Always check that the power supply corre-
sponds to the voltage on the rating plate.
Power plugs must match the outlet. Never modify the plug in
any way. Unmodified plugs and matching outlets will reduce
risk of electric shock.
If the supply cord is damaged, it must be replaced by
u
the manufacturer or an authorised Black & Decker
Service Centre in order to avoid a hazard.
Extension cables & Class 1 product
A 3-core cable must be used as your appliance is
u
earthed and of Class 1 construction.
Up to 30m (100 ft) can be used without loss of power.
u
Electrical safety for model WBV1450
#
This appliance is double insulated; therefore
no earth wire is required. Always check that the
power supply corresponds to the voltage on the
rating plate.
Power plugs must match the outlet. Never modify the plug in
any way. Unmodified plugs and matching outlets will reduce
risk of electric shock.
If the supply cord is damaged, it must be replaced by the
u
manufacturer or an authorised Black & Decker Service
Centre in order to avoid a hazard.
(Original instructions)
Features
This Appliance includes some or all of the following features.
1. Container
2. Extension tubes
3. Handle adapter
4. Hose
5. On/off switch
6. Handle
7. Accessory mounts
8. Upholstery tool
9. Crevice tool
10. Wheels
11. Floor head
12. Power tool socket (WBV1405P Only)
Assembly
Removing the lid (fig. A)
Release the two clips (14) that hold the lid (13) in place.
u
Carefully remove the lid from the appliance.
u
Fitting the lid (fig. A)
Fit the lid to the container (1) making sure that the
u
recesses in the lid (13) line up with the clips (14).
Fasten the two clips (14).
u
Fitting the wheels (fig. B)
Remove the lid as described above and turn the container
u
(1) upside down.
Insert the four wheels (10), make sure that they click firmly
u
into place.
Fitting the filter (fig. C)
Remove the lid as described above.
u
Place the filter (16) over the plastic frame (15) making
u
sure that the studs inside the filter line up with the receiv-
ing holes (17).
Turn the filter (16) clockwise.
u
Removing the filter (fig. C)
Remove the lid as described above.
u
Turn the filter (16) anti-clockwise.
u
Lift the filter (16) off the plastic frame (15).
u
Fitting the paper dust bag (dry vacuuming only)
(fig. D)
Remove the lid as described above.
u
Fit the cardboard flange (18) of the paper dust bag (19)
u
around the hose inlet (20).
Fit the lid as described above.
u
ENGLISH
5