Sony PMW-F55 Operating Instructions Manual page 51

Paint
Menu items Sub items and setting values Contents
White Clip
Setting
On / Off
Adjusting the
white clipping
Level
When the system frequency setting
is 59.94, 29.97, or 23.98.
90.0%~109.0% (108.0%)
When the system frequency setting
is 50, 25, or 24.
90.0%~109.0% (105.0%)
Detail
Setting
On / Off
Setting the detail
adjusting
Level
–99 to +99 (±0)
H/V Ratio
–99 to +99 (±0)
Crispening
–99 to +99 (±0)
Level Depend
On / Off
Level Depend Level
–99 to +99 (±0)
Frequency
–99 to +99 (±0)
Knee Aperture
On / Off
Knee Aperture Level
–99 to +99 (±0)
Limit
–99 to +99 (±0)
White Limit
–99 to +99 (±0)
Black Limit
–99 to +99 (±0)
V Black Limit
–99 to +99 (±0)
V Detail Creation
NAM / Y / G / G+R
Aperture Setting
On / Off
Setting the
aperture
Level
compensation
–99 to +99 (±0)
Turns the white clipping adjustment on or off.
(This setting is available only when "Gamma Category" in
"Gamma" is set to "STD" or "HG.")
Sets the white clip level.
Turns the detail adjusting function on/off.
Adjusts the detail level.
Adjusts the ratio between the H detail level and V detail level.
Adjusts the crispening level.
Turns the level depend adjustment function on/off.
Adjusts the level depend level.
Sets the center frequency of the H details signal.
(Setting the center frequency higher decreases the details.)
Turns the knee aperture compensation function on/off.
Adjusts the knee aperture level.
Adjusts both the white and black detail limiter.
Adjusts the white detail limiter.
Adjusts the black detail limiter.
Adjusts the black V detail limiter.
Selects the source signal to generate the V detail signal.
NAM: Highest level signal of V detail signal that is generated
by R signal, G signal, or B signal.
Y: Y signal
G: G signal
G+R: Synthesized signal from G and R signal with a same
ratio.
Turns the aperture compensation function on/off.
Adjusts the aperture level.
Setup Menu List 51