Table of Contents
Advertisement
10 www.aeg.com/au
6.3 Fast heat up function
The fast heat up function decreases the
heat up time.
1.
Set the fast heat up function. Refer
to the Oven functions table.
2.
Turn the knob for the temperature
/
6.4 Display
G
6.5 Buttons
Button
6.6 Heat-up / Residual heat
indicator
If you activate an oven function, the bars
in the display
Oven function
Pyro Cleaning
to set the temperature.
A
F
E
Function
CLOCK
MINUS, PLUS
,
MINUTE MINDER
TEMPERATURE
come on one by one.
To activate the automatic pyrolytic cleaning
function of the appliance. This function
burns off residual dirt in the oven. The oven
heats up to approximately 500 °C.
3.
An acoustic signal sounds when the
appliance is at the set temperature.
4.
Set an oven function.
B
C
A)
Timer
B)
Heat-up and residual heat indicator
C)
Water drawer (selected models only)
D)
Core temperature sensor (selected
models only)
E)
Door lock (selected models only)
D
F)
Hours / minutes
G)
Clock functions
Description
To set a clock function.
To set the time.
To set the MINUTE MINDER. Hold
the button for more than 3 seconds
to activate or deactivate the oven
lamp.
To check the oven temperature or
the temperature of the Core Tem-
perature Sensor (if applicable). Use
only while an oven function is in op-
eration.
The bars show that the oven tempera-
ture increases or decreases.
Application
The fast heat up function does
not deactivate after the acoustic
signal. You must deactivate the
function manually.
Advertisement
Table of Contents
