H1 Board Removal; G2 Board Removal (32 Inches); G4 Board Removal (37 Inches); Ip1F Board Removal (40 Inches) - Sony KDL-32S5600 Service Manual

2-9. H1 Board Removal

Connector
To remove the 'H1' board first remove the 'Rear Cover'
(See Sec 2-2-1 & 2-2-2) and then remove the 'Loudspeaker'
(See Sec 2-2-6). The 'H1' board can then be removed by
disconnecting the connector indicated and releasing the clip
circled.

2-11. G4 Board Removal (37 inches)

Screws
To remove the 'G4' board disconnect all the connectors
and then remove the 4 screws circled and ease the board
gently away from the back of the TV set.
Screw Part number(s) and Description(s)
2-580-629-01 SCREW, +BVST 3X8

2-10. G2 Board Removal (32 inches)

Clip
To remove the 'G2' board disconnect all the connectors
and then remove the 4 screws circled and ease the board
gently away from the back of the TV set.
Screw Part number(s) and Description(s)
2-580-629-01 SCREW, +BVST 3X8

2-12. IP1F Board Removal (40 inches)

To remove the 'IP1F' board disconnect all the connectors and
then remove the 4 screws circled and ease the board gently
away from the back of the TV set.
Note: Refer to page 4 - Hirose MDF61 connector.
Screw Part number(s) and Description(s)
2-580-629-01 SCREW, +BVST 3X8
- 12 -
Screws
Screws