D-Link DWL-7700AP User Manual page 59

DWL-7700AP User's Manual
Tool > Administrator Settings (continued)
Console Settings
Console Protocol: Select the type of protocol you would like to use, Telnet or SSH.
SNMP Settings
Public Community
Private Community
Trap Status: Check the box to enable the trap status.
Trap Server IP: Enter the trap server IP address. This is the IP address of the SNMP
Trap Type: You can specify what kind of trap type (System, Wireless) should be sent
Ping Control
D-Link Systems, Inc.
Status: Status is Enabled by default. Uncheck the box to disable the console.
Status: Status is Enabled by default. Uncheck the box to disable the SNMP
functions.
Enter the public SNMP community string.
String:
Enter the private SNMP community string.
String:
manager to receive traps sent from the wireless access point.
to the trap server.
Check the box to enable Ping control. Ping works by sending ICMP "echo
Setting:
request" packets to the target host and listening for ICMP echo response
replies. By disabling the Ping control setting, the AP will not respond to
the ICMP echo request packets. Default is set to enabled..
59