If You Replace The Main Pcb; 1 ] Load Programs; 2 ] Initialize The Eeprom On The Main Pcb (Function Code 01); 3 ] Specify The Cis Type (Function Code 59) - Brother DCP130C Service Manual

7.3 IF YOU REPLACE THE MAIN PCB

NOTE: If the main PCB is replaced, you should also replace both of the ink absorber box and flushing box.
Using the machine without replacing them for a long period may cause an overflow of drained ink from them,
thereby staining the machine.

[ 1 ] Load programs

If the main PCB is replaced with a new one, load the desired programs onto the flash ROM. Refer to
Appendix 2, page App.
If the main PCB is replaced with the one used for any other machine, follow the steps below.
(1) Change the firmware stored in the flash ROM. Refer to
(2) Reset each of the purge and flushing counters with the following procedure.
1) Press the Menu and Black Start (Mono Start) keys in this order. Next press the
times to make the machine enter the maintenance mode.
The machine displays "
the initial stage of the maintenance mode, a mode in which the machine is ready to accept
entry from the keys.
2) Enter 8 and 0 using the / and OK keys.
3) Press the Black Start (Mono Start) key several times until the purge (or flushing) count
appears on the LCD.
4) Enter 2, 7, 8, and 3 using the / and OK keys to reset the purge (or flushing) count.
5) Press the Stop/Exit key to return to the initial stage of the maintenance mode.
6) Enter 9 twice using the / and OK keys to exit from the maintenance mode.
[ 2 ] Initialize the EEPROM on the main PCB (Function code 01)
Refer to Chapter 9, Section

[ 3 ] Specify the CIS type (Function code 59)

Refer to Chapter 9, Section

[ 4 ] Customize the EEPROM on the main PCB (Function code 74)

Refer to Chapter 9, Section

[ 5 ] Check the control panel PCB for normal operation (Function code 13)

Refer to Chapter 9, Section

[ 6 ] Check the sensor operation (Function code 32)

Refer to Chapter 9, Section
2-5.
9.4.1.
9.4.12.
9.4.18.
9.4.7.
9.4.8.
7-25
Appendix 2, page App.
" on the LCD, indicating that it is placed in
2-7.
key four
Confidential