Table of Contents
Advertisement
Setting
Transparency
Image Display Format
Image Rendering Method
Click to Center Control
Select the check box to set the transparency level of the image information
(camera name, frame rate, motion detection bar, and recording icon) that is
displayed on the multi-monitoring window. (The default is 50%.)
When the check mark is not selected, the transparency is 0%.
Transparency can only be used when [GDI] is selected for Image Rendering
Method.
Note
•
For WV series network cameras and some BL series network
cameras, when [Perform motion detection with the camera] is
selected in the motion detection settings, the motion detection status
bar is not displayed.
Set the image aspect ratio of the displayed camera.
[Maintain the aspect ratio] (default): displays images in the camera's aspect
ratio.
[Untouched centering display]: displays centered images in the actual
image's aspect ratio.
Fit in the display area: Displays to fit in the display area.
To maintain the aspect ratio of the display press CTRL+0, to magnify the
display press CTRL+1 and to fit the display to the display area press CTRL
+2 on the keyboard.
Specify the Image Rendering Method.
Auto (default): First this software tries displaying images with
DirectX-Graphics, if this fails it tries displaying with DirectDraw. If
DirectDraw fails it displays with GDI.
DirectX-Graphics: Only displays with DirectX-Graphics.
DirectDraw: Only displays with DirectDraw.
GDI: Only displays with GDI.
You can select whether or not to use the Click to Center Control function.
Please remove the check from the checkbox if you do not want to use this
function.
3.1.2 Multi-Monitoring Page Settings
Description
Operating Instructions
105
Advertisement
Table of Contents
