Will Not Wash; Will Not Drain; Will Not Dry; Manual Function Test - Maytag JET CLEAN II JDB1100AW Service Manual

Electrical Mechanical Troubleshooting
To avoid risk of electrical shock, personal injury, or death, disconnect electrical power source to unit and discharge
capacitor through a 10,000 ohm resistor before attempting to service, unless test procedures require power to be
connected. Ensure all ground wires are connected before certifying unit as repaired and/or operational.

Will Not Wash

Wash Motor
Check Wash Motor circuit. See data listed on the
Technical Sheet, located behind toe panel.

Will Not Drain

Drain Motor
Check Drain Motor circuit. See data listed on the
Technical Sheet, located behind Toe Panel.

Will Not Dry

Vent Assembly
Check Vent Assembly for proper operation.
Heating Element
Check Heating Element circuit. See data listed on the
Technical Sheet, located behind Toe Panel.

Manual Function Test

See Technical Sheet, located behind Toe Panel.

Field Service Test

See Technical Sheet, located behind Toe Panel.
17
!
WARNING
16022783 Rev. 0
©2004 Maytag Appliances Company