Table of Contents
Advertisement
User Guide
H.1.3 Setting up Software iSCSI Initiator
To configure Software iSCSI Initiator, activate Initiator and then set the target address for Initiator. This
section describes the parameter settings related to CHAP authentication.
Activate Software iSCSI Initiator
Activate software iSCSI Initiator, so that ESX Server can be used.
1. After logging in to VI Client, select a server from the Inventory panel.
2. Click the Storage Adapter button under the hardware to be configured. (A list of available storage
adapters is displayed.)
3. After selecting an available software Initiator from the iSCSI software adapter, click Properties.
4. Click the Configure button under the General tab in the iSCSI Initiator Properties screen.
Release 6.0
Appendix H How to Set/Check Application Server (VMware) (iSCSI)
Figure H-13: Hardware Configuration Page Screen
Figure H-14: General Tab in iSCSI Initiator Properties Screen
412
Advertisement
Table of Contents
Troubleshooting
